CCTV Tester

CCTV Security Tester STest-894 IV Ten-in-One CCTV security tester Combine the video test, Digital Multi-meter, PTZ controller, video signal level test, NTSC/ PAL color pattern generator, UTP cable test, PTZ protocol analysis, PTZ address scan, DC12 1A output, Audio test to one body. The CCTV testerPRO STest-894 is developed for the On-Site installation and maintenance of video monitoring system. It can be used for displaying video, testing video level, controlling PTZ, scanning PTZ address, generating images, capturing data of RS485 and testing LAN cable etc. Its functions, easy operation, and portability makes it simple for the CCTV technician to install and maintain CCTV system, improving work efficiency and get the labor cost down. Application: 1.CCTV system installation and maintenance 2.Dome camera and All in one camera testing 3.The CCTV transmitting channel testing 4.PTZ controller FEATURES 3.5" TFT-LCD , 960 H 240 V resolution Digital Multimeter, performs AD/ DC Voltage, AC/ DC Current, Resistor, Conductivity, Capacitor and Diode test. DC12V power output Audio input Adjustable brightness, contrast, color of LCD Video Level testing, video signals measured in IRE or mV Automatically identify and adapt the video mode of NTSC and PAL Colorbar Video signal generator, transmit/ receive colorful images Support more than twenty kinds of PTZ controller protocols. For example, PELCO-P, PELCO-D, SAMSUNG etc. PPTZ address scanning, search up the ID of PTZ camera. Capture the PTZ protocol to assist the setting personnel to find out the control protocol and therefore easily target the problematic equipment. Support RS232 and RS485 interface, the rate 150-19200bps Powerful in testing LAN cable, measuring the connecting status and displaying the sequence of connection PTZ( P/ L & Zoom) Control: Control the status of P/ L, zoom in/ out the camera, adjust the aperture, foci and setting parameters, run and call the preset. Lithium Ion Polymer Batteries( 3.7V DC3000mAh) , more reliable, and work 15 hours Easy for use that the train is almost unnecessary SPECIFICATIONS MODEL STest-894 CCTV Security Tester Video Test Signal mode NTSC/ PAL ( Auto Adjust) Display 3.5 inch TFT-LCD , 960 x 240 resolution LCD adjust Adjustable brightness, contrast, color of LCD Video IN/ OUT 1 channel BNC Input & 1 channel Output Video Output Mode 1.0 Vp-p Video Level test Level test Video signals measured in IRE or mV Power Output Power output DC12V, 1A Audio Test Audio input 1 channel Audio input PTZ controller Communication RS232, RS422 simplex and RS485 PTZ Protocol Compatible with more than 20 protocols such as PELCO-D/ P, Samsung, Panasonic, Lilin, Yaan, etc.customized Baud Rate 150, 300, 600, 1200, 2400, 4800, 9600, 19200bps Video Signal Generation Color bar generation Output 1 channel color bar video signal for testing monitor UTP CABLE TEST UTP cable test Test UTP cable connection state and display in the screen. Read the number of the test box. PTZ data Capture and display PTZ Data Test Capture and Analyze the PTZ data sent from controlling device PTZ address scanning PTZ address scan Search up the ID of PTZ camera Digital Multimeter Reading range -6600~ + 6600 AC/ DC Voltage 0-600V Auto/ Manual ranging, 0.1mV resolution AC/ DC Current 6.6mA, 66mA, 660mA, 10A Manual ranging Resistor 660, 6.6K, 66K, 660K, 6.6M, 66M auto/ manual range Continuity Built-in buzzer will sound, if resistance is lower than 50 Diode 2.0V Range, 1mV resolution Capacitor 6600pF~ 66, 000 F auto/ manual range POWER Power Adapter DC5V, 2A Battery 1 pcs Lithium Ion Polymer Batteries, 3.7V DC3000mAh Rechargeable 4.5 hours recharging time, work for 12 hours Low Consumption Sleeping mode, display battery power state Other Parameters Work Temperature -10 ---+ 50 Work Humidity 30% -90% Dimension/ Weight 112mmx189mmx47mm / 500g