GSM Controller RTU5011

Brief Introduction of Function GSM SMS Controller RTU5011 is designed as a cost effective remote control and SMS alert system. It can monitor up to 8 dry contacts and 8 drivable relay outputs and 4 analog inputs. User-defined SMS is sent to pre-configure mobile phone numbers when a pre-defined alarm condition happens. These pre-configured mobile phone numbers can belong to technicians or engineers who are responsible in handling corresponding alarms. With the aid of this RTU5011, the alarm condition brings attention to in-charge personnel immediately. Besides it allows those mobile phone users to trigger any relay output by using SMS. The output can be connected with electrical equipment, such as electrical door, etc. There is a built-in microprocessor chip running on a real-time operating system. It gives immediate response to any change in both inputs and outputs condition. A GSM module is embedded in the RTU5011, user has to subscribe a SIM card for RTU5011. RTU5011 can be installed in any location under condition of GSM signal coverage. Features : 8 digital inputs, NC/ NO dry contact; 8 relay drivable outputs( open collector) , drive voltaged24V, drive currentd200mA; 4 Analog inputs, 0-53mA( compatible 4-20mA and 0-20mA) or 0-5V, 10 precision; Reliable performance with built-in double watchdog; Automatic device condition report through SMS every 24 hour interval; User-defined alarm condition ( normal Close or Open) , alarm and recovery SMS message for each alarm point; Supporting drive relay output; Maximum of 10 mobile phone numbers can be programmable; Supporting voice monitoring; Inside temperature sensor ( optional) ; Being available for internal battery and providing power cut off alarm ( optional) ; Configuration can be done via COM port RS232. Technical Spesification : Anolog Input: 4, ( 0-20mA, 10Bits) ; Digital Input: 8 ( Dry Contact, NC/ NO/ edge trigger Mode) ; Digital Output: 8 Drivable, not relay inside; Setup Method: PC Configurator via RS232 Port or SMS Commands; SMS Alert Number and Alarm Dial Number: 10; Backup Battery: 3.7V 800MAh LI-ION; GSM Freqency: 850/ 900/ 1800/ 1900Mhz Standard package: 1X Mainframe, 1X AC/ DC adaptor, 1X User Manual( CD) , 1X GSM ANT, PC Programmer is free charge in the CD, 1X RS232 Cable. If need Internal temperature sensor should plus 15.00USD. What Applications does the GSM Controller RTU5011 suitable for ? 1. Security Alarm System applications; 2. Supervision and monitoring alarm systems 3. Automatic monitoring system; 4. Vending Machines; 5. Pumping Stations; 6. Buildings and Real Estate; 7. Weather Stations; 8. River Monitoring and Flood Control; 9. Oil and gas pipelines; 10. Corrosion protection 11. Valve controls; 12. Wellheads; 13. Energy saving, street lights control system; 14. Tanks, levels, temperatures, water leakage applications; 15. Transformer stations; 16. Unmanned machine rooms; 17. Control room application; 18. PLC and Automation System, M2M; 19. GSM Access Control System, GSM Gate Opener, etc.